Electrical and Rigging Accessories

A wide assortment of components and tools for the fishing and boating equipment you use.

Watertight Marine Fuse Holders

Fuses

PART #110 – 16 ga. wire w/10 amp Fuse

PART #115 – 14-ga. wire w/15 Amp Fuse

PART #120 – 12-ga. wire w/20 Amp Fuse

PART #130 – 10-ga. wire w/30 Amp Fuse

PART #150 – 8-ga. wire w.50 Amp Fuse

  • Watertight In-Line Fuse Holders.
  • Fits 1/4” to 1 1/4” fuses.
  • Molded, heat resistant, non-breakable plastic, push-together for watertight marine applications.

Includes fuse.

Header Carded.

Fuses with Spare

PART #210 – 16 ga. wire w/10 Amp Fuse

PART #215 – 14-ga. wire w/15 Amp Fuse

PART #220 – 12-ga. wire w/20 Amp Fuse

PART #230 – 10-ga. wire w/30 Amp Fuse

  • Watertight In-Line Fuse Holders.
  • Fits 1/4” to 1 1/4” fuses.
  • Molded, heat resistant, non-breakable plastic, push-together for watertight marine applications.

Includes fuse, plus a spare

Header Carded.

Splash Proof Fuse Holder With Fuse

PART # 108 – 8-ga. wire 80 amp max

  • In-line automotive fuse holder
  • Automotive blade fuse – maxi
  • Splash proof type
  • Comes with 60 amp fuse

PART # 060 – Replacment/Spare Fuse

  • 60 Amp

Splash Proof Fuse Holder Without Fuse

PART # 112 – 12-ga. wire 30 amp max

PART # 114 – 14-ga. wire 20 amp max

PART # 116 – 16-ga. wire 16 amp max

PART # 118 – 18-ga. wire 10 amp max

  • In-line automotive fuse holder
  • Automotive blade fuses – APRs - ANRs
  • Splash proof type
  • Fuse not included

Waterproof Fuse Holder Without Fuse

PART # 212 – 12 ga wire 30 amp max

  • In-line fuse holder
  • Automotive blade type
  • Water proof
  • Fuse not included

Waterproof Fuse Holder Without Fuse

PART # 216 – 16 ga wire 15 amp max

  • In-line fuse holder
  • Automotive blade type
  • Water proof
  • Fuse not included

Butt Connectors Assorted

PART #160

  • 6 ea Red butts for 22-18 gauge wire
  • 6 ea Blue butts for 16-14 gauge wire
  • 5 Yellow butts for 12-10 gauge wire

Header Carded

Butt Connectors 8 Gauge

PART #165

  • 4 ea Red Butt for 8 gauge wire.

Header Carded

Ring Terminals 8 Gauge

PART #170

  • 2 ea Ring Terminals 8 gauge, 3/8” hole (fits on neg. terminal of deep cycle battery.)
  • 2 ea Ring Terminals 8 gauge, 5/16” hole (fits on pos. terminal of deep cycle battery.)

Header Carded

Automatic Livewell Timer

PART #500

  • Automatically turns livewell pump on and off!
  • Cycle position turns pump on for 30 seconds every 3 minutes
  • Keeps bait or fish alive without draining battery down
  • Easily replaces your on-off switch
  • 3/8” mounting hole for dashes up to 1” thick.

Skin Carded

View #500 Switch wiring diagram

Variable Livewell Timer

PART #510

  • On’ cycle pumps for 30 seconds; ‘Off’ cycle is variable from 0 to 5 1/2 minutes
  • Allows for continuous run for filling livewell
  • Keeps bait or fish alive without draining battery down
  • Easily replaces your on-off switch with 3 wires
  • 3/8” mounting hole for dashes up to 3/4” thick

Skin Carded

View #510 Switch wiring diagram

OEM Timer Module

PART #520

  • Replacement timer module used by many OEM’s for many years
  • Simply plugs into timer switch wiring harness

Plastic bag with instructions

View #520 Switch wiring diagram

3 Pin Timer Pod Only

PART #525

  • 3 pin timer pod
  • Pump runs for 1 minute – off for 3 minutes
  • Can run more then 1 pump
  • Load limit 10 amps

4 Pin Timer Pod Only

PART #540

  • Dimmer control
  • On – off – on
  • Momentary rocker or rotary switch
  • Load not exceed 2.5 amps

Variable Timer

PART #535

  • Variable timer
  • 1 minute on to 12 minute off
  • Relay output 10 amp
  • Dipped in urethane for moisture protection

Supplied with 2 mounting nuts 1 lock washer and 1 knob

Light Dimmer Switch

PART #530

  • Light Dimmer
  • 10 amp max.

Red and Black 8 Gauge Wire

PART #550

  • Premium marine grade copper wire.
  • For installing trolling motors and electric winches.
  • 20 ft. of both Red and Black.

Header Carded.

Heavy Duty Quick Connect Black Pin

PART #605

  • For wiring trolling motors, electic winches, down riggers, and other higher amperage wiring jobs
  • Exposed male pin molded to BLACK (-) wire

Header Carded

Heavy Duty Quick Connect Black Pin

PART #606

  • For wiring trolling motors, electic winches, down riggers, and other higher amperage wiring jobs
  • Exposed male pin molded to RED (+) wire

Bulk

4-Wire Quick Connector

PART #810

  • 16-gauge wire, 12” long
  • Jumper for trailer to vehicle
  • Can be cut in half to replace trunk and trailer connector

Bulk

Rigging Grommets

PART #610

  • Black rubber grommet
  • 1 7/8” outer diameter grommet, covers 1” hole

Header Carded

Rigging Grommets

PART #615

  • Black rubber grommet
  • 2 3/4” outer diameter grommet, 1.75" I.D.

Header Carded

Rigging Grommets

PART #620

  • Black rubber grommet
  • 3-3/8” outer diameter grommet, 2.25" I.D.

Header Carded

Rigging Grommets

PART #625

  • Black rubber grommet
  • 4” outer diameter grommet, 3” inner diameter

Header Carded

Wire Hole Cover

PART #650

  • Black plastic cover mounts over holes up to 1 1/4” diameter
  • 2 covers per package with 4 mounting screws

Header Carded

Thumb Screw

PART #725

  • Replacement thumb screw for motor mate in poly bag with flat washer and lock washer

Bulk

Battery Box Tie Down

PART #860

  • Marine grade velcro strap has over 300 lbs. Breaking strength, holds battery secure
  • Makes battery installation and removal simple and easy. Comes with mounting hardware.

Skin Wrapped

Shift and Throttle Control Mounting Board

PART #950 – Single Control 12” x 12” x 1/2”

PART #960 – Dual Control 12” x 24” x ½"

  • Made from King StarBoard® marine grade plastic
  • Easy to cut with wood working tools if needed to size for specific dimensions

Card Wrapped